Ionic network for aqueous-polymer binders to enhance the electrochemical performance of Li-Ion batteries
In brief, an LiFePO4/C cathode with water-based binders demonstrated [...]
Electrode manufacturing for lithium-ion batteries—Analysis of current and next generation processing
This is a great article on slurry mixing, coating, drying, [...]
Preparation of Water-Resistant Surface Coated High-Voltage LiNi0.5Mn1.5O4 Cathode and Its Cathode Performance to Apply a Water-Based Hybrid Polymer Binder to Li-Ion Batteries
The coated LiNi0.5Mn1.5O2 particles not only exhibited water-resistant property but [...]
Aqueous Ni-rich-cathode dispersions processed with phosphoric acid for lithium-ion batteries with ultra-thick electrodes
The composite binder was comprised of 1:4 ratio of carboxymethylcellulose [...]
Lithium and transition metal dissolution due to aqueous processing in lithium-ion battery cathode active materials
Despite the additional tech-nical barriers in aqueous-based cathode processing, [...]
Towards Understanding of Cracking during Drying of Thick Aqueous-Processed LiNi 0.8Mn 0.1Co 0.1O 2 Cathodes
Replacing N-methyl-2-pyrrolidone (NMP) with water for processing of lithium-ion [...]
Enabling aqueous processing for LiNi 0.80Co 0.15Al 0.05O 2 (NCA)-based lithium-ion battery cathodes using polyacrylic acid
Adding PAA to an aqueous NCA slurry can provide [...]
How to get 1000 cycles with a 800-cycle EV cell
Usually, the cell makers will state a cycle life [...]
The role of the pH value in water-based pastes on the processing and performance of Ni-rich LiNi0.5Mn0.3Co0.2O2 based positive electrodes
pH value between 7.6 and 12.5 will be appropriate [...]
Dispersion properties of aqueous-based LiFePO4 pastes and their electrochemical performance for lithium batteries(2008)
In the present investigation, a stable slurry was prepared [...]
Small things make a big difference: binder effects on the performance of Li and Na batteries(First published:25 Jun 2014)
Leeet al. reported that the addition of PAA significantly [...]
Aqueous processing based novel composite electrode for Li-ion batteries using an environmentally benign binder(Available online 1 September 2021)
Aqueous processing based novel composite electrode for Li-ion batteries [...]
LiFePO4 water-soluble binder electrode for Li-ion batteries (2006 Published by Elsevier B.V.)
A research article with the name of LiFePO 4 [...]
LG Energy Solution developing LFP battery for EV market
LG Energy Solution, a subsidiary of LG Chem, has started [...]
Renewable PVDF Burnishes Li-Ion Battery’s Green Credentials
Arkema has launched a sustainable Kynar PVDF (polyvinylidene fluoride) range, [...]